Looks pretty and has a solid look and feel. Instructions were excellent with one small exception - picture of center leg in Step #4 needs to be rotated 90 degrees on its long axis to match the correct position as shown in Step #5. However, a note of caution needs to be given. Some cabinetry skills were required to fix poor quality control as follows: 1) Although all upper and facing parts are of solid wood, some lower parts are either pressed board or manufactured wood. As a result of parts #4 both having dowel holes drilled into their ends (these were manufactured boards) they had split so had to repair these with wood glue and clamps. 2) One of the screws holding together the drawer unit had a broken head which I extracted with pliers. 3) Three other 3/8" screws securing the drawer rail were loose in the box on delivery. I replaced two of them with 1/2" screws. The third could not be replaced without taking apart the entire factory-assembled drawer, so I secured the drawer rail that was missing the screw with several screws above and below that rail. 4) The provided hardware was excellent with the exception that two of the 6 connector nuts (part #B) broke during assembly due to being made of inferior material, and had to be replaced. Home Depot had these fasteners made of much more solid material. So DO NOT apply any more pressure than is absolutely to rotate part #B (made of plastic or cheep aluminum) into part #A (made of solid zinc).